FieldComm Group Forums for FOUNDATION Fieldbus technology  

Go Back   FieldComm Group Forums for FOUNDATION Fieldbus technology > Public Forums > Fieldbus User's Network [FUN]

Fieldbus User's Network [FUN] The Fieldbus User Network List Forum. Post your fieldbus related questions here.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old January 21st, 2016, 06:59 PM
type18 type18 is offline
Fieldbus Member
 
Join Date: Aug 2005
Posts: 24
The FBT-6 samples the noise signal on a regular basis, but not continuously. As a result, it is normal for a continuous noise signal to produce peak noise measurements that are higher than average noise measurements. For example, the average noise would be about 70% of the peak noise level if the noise was a sine wave.

If a peak noise measurement is bad you should look into it.

Try resetting the peak noise values to 0 (hold down the SEL button for 3-4 seconds) then see how long it takes for the peak noise level to go back to what it was. If it happens in a few seconds, you have a continuous noise issue. If it takes more than say a minute, it is an intermittent noise.

Knowing if the noise is intermittent or continuous can help you identify the source. Continuous noise could be caused by FF cables running parallel to high current power lines. Intermittent noise could be caused by something like a large load (motor or pump) turning on/off.

Let me know if you need more help.
Cyrus
__________________
Cyrus Kelly
Engineer
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Regarding Fieldbus Segment Noise sanjay_daxini Fieldbus User's Network [FUN] 2 November 5th, 2013 04:56 AM
FF Segment Noise FFNEWBIE Fieldbus User's Network [FUN] 3 August 12th, 2011 06:45 AM
Question on Low Frequency Noise CHRISC1024 Fieldbus User's Network [FUN] 1 March 3rd, 2010 09:49 AM
Fieldbus grounding and noise spikes Carl Haffner Fieldbus User's Network [FUN] 3 May 1st, 2007 01:52 PM
Average device current Mike ONeill Fieldbus User's Network [FUN] 1 July 25th, 2006 02:31 AM


All times are GMT -5. The time now is 10:49 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 2011-2015 by FieldComm Group. All rights reserved.